Secant Cardio IIe Especificações Página 8
- Página / 53
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Installation procedure
5
1- Security equipment installation
1) Select alarm detectors and sensors according to needs and location.
2) Check correct location of all security equipment and install them.
3) Wire all security devices to the CARDIO controller (do not make connection yet).
4) Installation and connection of doorbell and siren.
5) Individual testing of security sensor (use an Ohmmeter and a battery).
2- Touch panel and key reader installation
1) Check correct location of touch panel(s) and electronic key reader(s) and install them.
2) Wire the SNet Bus for the touch panel and the digital key readers (see schematic section p.36).
3) Check the bus for short or problem (see troubleshooting section p.30)
ATTENTION!: for the bus wiring, we strongly recommend to use a twisted pair of wire from a
cable No 18awg unshielded (CAT-5 or 5e).
3- Temperature control installation
1) Check the kind of heating/cooling system to be connected to CARDIO (refer to their respective
technical notice for proper installation and connection).
2) Install relays, safety thermostats, etc.
3) Connect high/low voltage wiring to relays, thermostats, etc. (see schematics section for each type
of heating system).
4) Check functionality of the heating/cooling system before connecting to CARDIO.
4- Control module installation (light, load, shade) if any.
1) Check loads to be controlled (type, power) and their respective specifications.
2) Check the kind of control module to be connected to CARDIO. (see their respective technical
notice for proper installation and connection).
3) Install control module and switches.
4) Wire high and low voltage for the module and switches.
5) Wire the communication Bus for the module to CARDIO.
- Installer’s guide 1
- Limited warranty 4
- Installation procedure 6
- PRIOR TO THE INSTALLATION 7
- SUGGESTIONS 7
- 8- CARDIO IIé programming 9
- Advance configuration 10
- Zones types 11
- Monitoring 14
- Zone report. codes 14
- System rep. Codes 15
- Temperature 15
- Central heating system 17
- Heat pump system 17
- HVAC System 18
- HVAC setback 19
- Heating setback 20
- System restore 21
- Troubleshooting 22
- Bus (SNet) protection 23
- Relay protection 23
- Security input protection 23
- Digital key input protection 23
- X-10 interface protection 23
- Telephone 24
- Type of telephone 25
- Central monitoring station 25
- No control from screen 26
- Electronic transformers 27
- Nothing works 28
- How to check CARDIO relays 28
- Central heating systems 28
- Low temperature thermostat 29
- Security 30
- Color code 31
- Types of smoke detectors 31
- End-of-line-resistance 31
- Siren output 31
- Only one item does not work 32
- How to install the bus 33
- Bus checking 33
- Peripheral items checking 33
- Bus polarity 33
- LED status 34
- Schematics 35
- CONNECTIONS SCHEMATICS 37
- TP2B contrast adjustement 41
- 1) Central heating 42
- 2) Heat pump RH 43
- 3) Heat pump RC 43
- 4) HVAC 44
- Connection schematic HVAC 44
- 5) HVAC setback 45
- 6) Heating setback 46
- Telephone menu 50
- Industry Canada Warnings 52
- Montreal, Canada, H3J 1R4 53
Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Secant Cardio IIe
(29 páginas)Bauknecht KGSF 20P A4+ IN Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Gefrierschränke Bauknecht KGSF 20P A4+ IN.
Wir stellen 2 PDF-Handbücher Bauknecht KGSF 20P A4+ IN zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Gebrauchs- und Pflegehandbuch
Comentários a estes Manuais